---
title: "BESS Design: Manual Design Mode"
url: "https://knowledgebase.glintsolar.com/en/article/bess-design-manual-design-mode"
language: "en"
last_updated: "2026-11-11T12:45:32.247Z"
---

# BESS Design: Manual Design Mode

By default, Glint arranges the sets in a BESS polygon for you, using the set definition and distances from your BESS profile. With manual layout, you arrange them yourself: move, rotate, add or delete sets, batteries and MV stations.

### When to use manual design mode

Stay in automatic layout as long as you can. It is the fastest way to a layout, it re-arranges itself when you change the profile, the polygon or the target power, and every set keeps the distances your profile prescribes. It is the right choice for a first quick assessment, for large sites, and for any site whose shape is not too complex.

Switch to manual layout for the last adjustments, the ones a rule can't make:

-   an awkward plot: rotate one set into a corner, or move one to clear a road or a drainage line
-   one set that differs: an extra battery where there is room, or the MV station turned towards the road
-   an engineer's drawing to reproduce

[Embedded content](https://www.loom.com/embed/11d569cf41a948f0ab2c3e4a8d77874e)

### How to use manual design mode

#### Switch to manual layout

-   Start a new analysis and select the BESS polygon.
-   In **BESS layout**, click **Arrange manually**.
-   The sets stay where Glint placed them. The **Manual layout** toolbar appears above the drawing tools.

![](https://cdn-assets.productfruits.com/0de6129c-03dc-467a-aa3b-fcea9b167a6c)

#### Arrange sets

-   **Select** a set with one click. Press **Esc** or click elsewhere to deselect.
-   **Move** it by dragging. Close to its original position the set snaps to the profile's spacing; further away it moves freely. A set can't leave the polygon.
-   **Rotate** it with the handle above the selection. Near the layout's angle, or a quarter turn from it, the rotation snaps.
-   **Add a set** with **Add > Set** (no set selected), then click where it should go. The new set is built from your profile.
-   **Copy and paste** a selected set with Ctrl+C and Ctrl+V (Cmd on Mac). The copy lands on top of the original; drag it into place.
-   **Delete** a selected set with the Delete key or the trash icon in the toolbar.

#### Edit batteries and MV stations

1.  Select the set, then click a battery or MV station inside it.
2.  Drag it to move it, or use the handle to rotate it. Inside a set nothing snaps; the only limit is the polygon.
3.  **Add > Battery** or **Add > MV station** adds one to the selected set; click to place it. Ctrl+C and Ctrl+V copies the selected one.
4.  The Delete key or the trash icon removes it. A set always keeps at least one battery and one MV station  
      
     

![](https://cdn-assets.productfruits.com/885aba78-c44e-41db-9593-8449ba436d9f)

#### Revert to automatic layout

Click **Revert to automatic layout** in the BESS layout section and confirm. Glint arranges the sets from your profile again. Everything you placed by hand is removed, and there is no undo.

![](https://cdn-assets.productfruits.com/eeb73e7e-2509-4b36-af48-7ea9e67251c6)

### FAQ 

**Are my profile distances still enforced?** No. In a manual layout, the distances are yours to keep. The starting point of a manual layout, however, does respect the distances defined in your profile. Once you start moving containers, you are responsible for making sure security distances are respected.

**Why are Automatic orientation and Limit to target power greyed out?** They are only available in Automatic mode, when the software lays out the BESS containers for you. Revert that polygon to change them.

**Why can't I open Equipment or Set and layout definition in New analysis?** Those settings describe the sets Glint builds for you. While any BESS polygon in the project has a manual layout, they are unavailable. Revert that polygon to change them.

**Does the analysis use what I placed?** Yes, exactly as placed. The manual layout is saved with the polygon and is still there when you reopen the project.

**I edited sets in an earlier version of Glint. Where are my edits?** Polygons with the old set overrides open in manual layout automatically, with your edits kept.

**Can I still edit the polygon?** Not while its layout is manual. Revert, reshape, then arrange manually again.

**What about exclusion zones?** Exclusion zones are used by Glint in automatic PV and BESS layouting. A manual layout is designed by the user, and doesn't avoid them automatically.
